david42 Posted October 8, 2013 Report Share Posted October 8, 2013 The new floor has no holes I have drilled some to align filler neck with hole in body but tank intrudes forward of rear scuttle is this correct? The brackets are also missing that go beneath tank I need size and position Thankyou Quote Link to post Share on other sites
Don Elliott Posted October 8, 2013 Report Share Posted October 8, 2013 If your TR is a pre-TS60000, there are no bracket supports under the 15 Imp. Gal. fuel tank. If you have a late TR (post TS60000 TR3A or TR3B), there are supports as shown. Also, the tank is smaller - only 12 Imp. Gal. Quote Link to post Share on other sites
Don H. Posted October 9, 2013 Report Share Posted October 9, 2013 As Don notes -- commission number is critical here. Here are a few more of a post-60000 shell. Pay no attention to the odd modifications to the wheel arch and the leading edge of the shelf -- those are to give legroom to this 6'6" driver.: Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.