peter t Posted March 13, 2012 Report Share Posted March 13, 2012 Any one out there who can answer a simple question? When refitting my steering rack with new poly bushes, do i push the U bolt mounting brackets outwards (apart) or pull them inwards (together) to pre tension the bushes? cheers peter t Quote Link to post Share on other sites
jerrytr5 Posted March 13, 2012 Report Share Posted March 13, 2012 Probably doesn't matter with poly, but outwards so that the bush is compressed between the clamp and the rack stop plate. Don't forget the little nylon bush under the non-drivers side clamp. Quote Link to post Share on other sites
peter t Posted March 13, 2012 Author Report Share Posted March 13, 2012 Cheers Jerry - we've probable see each other's TR at some point i'm also in Chesham - small world Quote Link to post Share on other sites
Tom Fremont Posted March 15, 2012 Report Share Posted March 15, 2012 Still got the original rubber ones in both of mine - tight as a drum thanks to this handy little device, made from a 3/8" turnbuckle: Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.