hensh2004 Posted September 21, 2009 Report Share Posted September 21, 2009 (edited) I have the chance to buy a rebuilt tr6 /2500 j type overdrive box ,with the intention to put in my 62 tr4. Could someone tell me if all the pressure plate clutch fork slave cylinder etc are compatible, and is there anything i need to know, before I commit to buy. Any response will be very welcome. Thanks, Andy Edited September 21, 2009 by hensh2004 Quote Link to post Share on other sites
ctc77965o Posted September 28, 2009 Report Share Posted September 28, 2009 Hi Andy, My Recollection is that the Triumph 2000 primary shaft is different diamter, otherwise all is same. That would mean to use the Tri2000 driven plate... or swap out the primary shafts. maybe someone can confirm as I havent thought about this seriously for 10 yrs.... dave I have the chance to buy a rebuilt tr6 /2500 j type overdrive box ,with the intention to put in my 62 tr4. Could someone tell me if all the pressure plate clutch fork slave cylinder etc are compatible, and is there anything i need to know, before I commit to buy.Any response will be very welcome. Thanks, Andy Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.