phid75 Posted September 25, 2008 Report Share Posted September 25, 2008 Hi all TRists, I a currently converting a TR4 body for a TR4A IRS chassis. I am about to make and weld the rear bump stops in the wheel archs. Since I don't have a TR4A chassis with rear suspensions mounted, I need some clue to work out and position these bump stops. I've made a little drawing which, I hope, will make things clear. What I basically need to know is : * is the bump stop facing the wheelarch center (as figured) or, if not, where is its axis ? * what is the orientation of the bump stop from the vertical (angle "a" in degrees). From the pictures I've found it must between 10 to 30 degrees ? * what is the length "d" of the bump stop ? And if I don't ask too much, its width at the base and at the end ? If anyone of you IRS owners could make these measures for me, that would be of great help best regards Philippe- Quote Link to post Share on other sites
Dale Moore Posted September 25, 2008 Report Share Posted September 25, 2008 Will send you mail Regards Dale Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.