Search the Community
Showing results for tags '7/8” bore'.
Found 1 result
Hi all, Lost the clutch. Pedal to the floor and surprise surprise no fluid in the master cylinder. Car hasn’t been driven over the winter save for a couple of mile blast a couple of weeks ago. There is no evidence of fluid leak on garage floor but that aside inspection of the slave cylinder shows a lot of wear marks on the piston, even if the seal doesn’t look bad. Anyway decided that a new slave is in order, but the one removed has County S02 10 or SO2 10 and 7/8” on outer casting surface. I see that all the usual suspects have the standard 1” slave available with the exception of Revington who also list a 7/8” bore alternative at twice the price. Now I would like replacement to be similar to existing, but to muddy the water a little more the bore of the existing cylinder is actually 1” and not 7/8” as shown on the casting. Anyone come across anything similar, and knowing that there is a lot of scepticism around regarding spare part quality are there any good recommendations for a replacement source? Would be also good to know what the actual size of the standard 1” bore slave is - 1 1/8” maybe? I attach a couple of pics for reference. As usual many thanks in anticipation for all gems of wisdom from what is the best knowledge database on the planet. thanks, TonyC