Jump to content

RogerH

TR Register Members
  • Content Count

    31,065
  • Joined

  • Last visited

4 Followers

About RogerH

  • Birthday 12/02/1949

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Location
    West London

Recent Profile Visitors

19,270 profile views
  1. Hi Jerry, Without seeing the circuit a little guess work would suggest that if the amplifier section is a big(ish) IC then with one channel having problems the internal safety system may shut it down (on all channels). So the answer is Yes. Replace the speaker Roger
  2. Hi Richard have a look here There are other video clips on YT Roger
  3. Hi Justin, How much are they? Roger
  4. Thanks Chaps. Peter, I had thought of that but it is a lot of buggering around. Roger
  5. Hi Phil, Soak it in White Spirit and use a scrapper to loosen. Once removed, the inside of the sump can be cleaned with the cleaner of your choice. Roger
  6. Hi Folks, is it possible to refill and pressurise an aerosol can once finished. I'm thinking of Wynn's Brake & clutch cleaner. Roger
  7. Hi Phil, I use Wynn's Brake & Clutch cleaner. It works very well on any grease / oil I prefer the aerosols for convenience but not cheap. A 5ltr can is significantly cheaper but less convenient. https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=Wynnes+Brake+%26+Clutch+cleaner&_sacat=0&_odkw=Brake+%26+Clutch+cleaner&_osacat=0 Roger
  8. Hi Ernest, SuperPro bushes had no effect on the stance of my 4A and the driving/control appeared to be improved slightly. The main benefit is the longevity. The standard rubber bushes have a question m,ark over them. Roger
  9. Ooops! didn't see that. However the channel may be usable with the bottom slides replaced. Roger
  10. Hi Frank, following Stuarts lead - here is the Metro regulator from Rimmers. Dead cheap worth buying one to see if it can be adapted. https://rimmerbros.com/Item--i-GRID000630 Roger
  11. Hi Frank, four or five years ago Pete Wigglesworth put a post on showing a source for something very similar. The channel will work but it will take some fettling. I think I have 4 in my todo box. They were about £5 each. I'll have a look for Pete Forum handle and posy it here. BlueTR3A-5EKT If the original source is dead then You can have one of mine. I'll look in the garage to see what needs doing. I thinkl it came from a BL salon car !! Roger
  12. Hi Alf, the thin walled wire works well. It is usually quoted as able to carry more current than the equivalent thicker walled cable. Have a look here CABLE Roger
  13. Hi Alan, make sure that no body work or bolts from the bonnet rubbers are protruding too far onto the RED wire. Roger
  14. The Cyclone Racer is a beauty. Everybody should have one. Roger
  15. Hi John same for me. I suspect a continuation of the other week's disruption. Contact the office would be the way to go. Roger
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.