Jump to content


TR Register Members
  • Content Count

  • Joined

  • Last visited

Everything posted by leonnewman1

  1. Hi. Has anybody received final instructions for gurston on Sunday?
  2. All I can say is that I decided on yellow stuff pads but I know some others don't rate the ebc brand
  3. Hi. I am swapping out the wires for minilites on my 4a with press in studs all round and I would like to use open nuts. Are the front studs the same as the rear? I was able to get some extra long studs from moss for the front but only standard steel wheel studs for the rear which are considerably shorter. Or any other advice? Thanks
  4. Thank you. I will be the one with the shiny new overalls
  5. So it looks like my 1st event in the tr sprint calendar will be at goodwood in April. I think I have got everything lined up but was wondering if there was anybody going that wouldn't mind showing me how things work on the day?
  6. Oh thanks. That has saved me a considerable amount of money.
  7. I have vred sprints but didn't think they were on the approved list?
  8. Sorry. Sprinting. 15x6 wheels. Combined road and track use. Tr4a
  9. Sorry. Sprinting. 15x6 wheels. Combined road and track use
  10. leonnewman1


    Hi all It looks like I am going to have to change my tyres (not on approved list) and i was just wondering what Tyres people would choose?
  11. Perfect. That helps. Thanks
  12. Hi everyone. I am hoping to join the register championship this year in my tr4. Can ssomebody please explain the timing strut to me. I.e. what is it for, is something mounted on it, what dimensions, located where etc Thanks in advance
  13. Do you have a pcv valve fitted if so this could cause an air leak. Definitely sounds like an air leak on the inlet.
  14. Hi - i know this topic has been covered before but i cant seem to find the info i am looking for in previous posts. I have already purchased a set of weber 45s and I want to request a setup from the supplier that is going to be closer to the final setup(post rolling road) than the standard setup so that I can avoid additional cost as much as possible. My TR4a is currently producing 155bhp at the flywheel on SU HS6s. I am also planning on sprinting/racing in the future. It has 89mm pistons, balanced crank, lightened/balanced flywheel, gas flowed head, piper rally cam, phoenix manifold and big bore exhaust. any help really appreciated. thanks
  15. tested the yellowstuff pads and I have to say that I am really impressed. Much improved breaking performance and feel (not sure what was on the car before) even from cold. Oh and no squeeeeeel.....yet
  16. Thanks. I couldn't find anything on their website. Do you happen to know the link?
  17. Hi, does anybody know who sells a mechanical fuel pump blanking plate with a breather hole for use in a closed circuit breathing system with an oil catch tank? thank you
  18. perfect - set clearances as per spec. they were set at 0.01 inlet and exhaust - car is now idling lower and running cooler.......
  19. sorry trying to copy a table or image but struggling
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.