[Drive it Day.]

Hi Roger,

I didn't know about the pasqueflower, I will go and have a look, they sound like they are well worth seeing.

Phil

[Drive it Day.]

  On 4/21/2024 at 10:50 PM, SuzanneH said:

Hi Sue

No, not us we were A10 and then A1092 but good to hear other TR's were out there 

 

It was the Lea Valley forming up to set off to join the NLG. I saw a white TR drive by and drive up towards Therfield and wondered if it was one of our lot getting lost!

Phil

[Have a look at this, on trs out and about, well done Graham]

Graham completed his solo, 25 day, 5000+ mile coastal drive in a TR4 of the UK mainland on Sunday night after leaving Eastbourne on Sunday morning at 6.30am. A group of us from the LVG went down to see him on Saturday evening and made sure he was "well fed and watered" ready for the last leg.

His drive has been fully self funded and many of the nights have been spent in his one man tent. He has been raising money for Guide Dogs for the Blind and has so far collected £3,340.00 of his target £5,000.00 The TR4 has behaved impeccably with only minor problems, which were soon fixed with assistance for the Scottish TR members, who also made him very welcome in his time in Scotland. Pinky was a great tour guide for Graham on the I.o.W. and made sure he got around the island without trouble.

If anyone would like to donate they can click on the link https://www.justgiving.com/page/graham-teeson-5000-miles-25-days

The little video is Graham setting of from Eastbourne. An article of his odyssey can be found in our April TRunnion Newsletter 

 

Phil.

TRUNNION April 23.pdf

[Tacho problem]

Many thanks, I will have a look at both of those suggestions.

 

Phil

[Tacho problem]

Hi,

 

My tacho stopped working some time ago and I was advised to change the cable as these can give problems. So I changed the cable but still no reading. I removed the tacho and tried it with a spare cable direct into the distributor and hey presto it worked, so then I put it loosely back into the dash and it was still working. Once it was all screwed back together it had stopped working. I have repeated this palaver 3 times now with the same result.

It has occured to me that the inner cable might be too short as there is not a lot of the "squared" end of the inner cable protruding from the outer. Has anyone else had the same problem or can offer some advice?

 

Thanks in advance,

 

Phil

[Powder coating Herts or North London?]

Hi, probably a bit too late but you could try Full Range Finishing in Letchworth. www.fullrangefinishing.co.uk The owner is a Register member.