[Timber glue]

definitly cascamite

[Independent Shenanigans]

nasty woman

[Domestic Ladder]

i give my window cleaner a tenner and he has it done in twenty mins

[overdrive]

thanks for the guidance

[overdrive]

can someone help me please,does the oil in the overdrive on a t6 a type overdrive fill from the gearbox or seperately.

[Door capping]

I used bronze pan head screws and they blend in with the walnut very well.

[general tr6 stuff]

 

 

 

[general tr6 stuff]

original spare wheel cover flat in pretty good condition for its age,new tan seat with built in headrest and frame for matching seat (stripped) also mounting hardware,left hand drive dash back panel,left hand drive wooden dashboard,fuel sender unit,hood cover in new tan(original)in good condition needs a good clean,pair of original bumpers in reasonable condition (one of the corners has been stripped ready to re-chrome)there  also some small holes which have been drilled for number plates and spot lights etc,red engine fan(12 blade) number plate light bumper mounted,pair of original rear shock absorbers brand new pair of front coil springs pair of supports(behind crash pad)original steering wheel (needs recovering) will take sensible offers 07412677307 if you have any questions.

[Expensive TR6]

that looks like the one that was on show in the marquee at stratford last year.

[MGTF seats]

i also tried them but they were too wide.

[Is this a TR6 Fuel Cap`??]

it looks the same as the one on my 72 also a cc model,imhave seen some that are a lot smaller hope this helps.

[number plate ?]

if you go to the dvla website it will tell you how to fill the 5/55 form in it tells you to leave some part s blank,the  certificate of conformity is for much more modern cars.having said that i wouldnt rush the dvla is closed to everyone except essential workers  and hgvs i sent my form in on the 23rd of march and still no news when i checked a couple of weeks ago they hadnt cashed the cheque and they are not accepting phone calls or emails,just gotta wait.

[number plate ?]

if you go to the dvla website it will tell you how to fill the 5/55 form in it tells you to leave some part s blank,the  certificate of conformity is for much more modern cars.having said that i wouldnt rush the dvla is closed to everyone except essential workers  and hgvs i sent my form in on the 23rd of march and still no news when i checked a couple of weeks ago they hadnt cashed the cheque and they are not accepting phone calls or emails,just gotta wait.

[New to TR world]

rimmer brothers is in lincoln,that could be handy.

[anti climax]

thanks for the guidance,happy to report it passed today with flying colours.

[anti climax]

thanks for the replies,will speak to them tomorrow.

[anti climax]

Hello all, I some help needed if you please! I took my tr 6 in for its first mot today. It's been restored over the last five years and converted to right hand drive. I took the day off work and after two hours of waiting at home. pacing up and down like an expectant father, had a phone call telling me that I couldn't get an mot without a log book is this correct? I was under the impression that i needed an mot in order to get a log book and reg number!

Any help\ advice would be appreciated, thanks

[Inlet ducting]

apparently its no longer available i had the last of some old stock

[Inlet ducting]

got mine over the counter at david manners about 7 quid

[engine]

i have a spare tr6 engine fully rebuilt for sale if anyone needs one,i have written an ad out four times in classified section only to see it disappear when i pressed the submit button{quite a time consuming job for a one finger typist.

[Mystery]

Hi, does anyone know where these come from? I'm coming to the end of the build and I've got these left! I can't remember taking them off and I've no idea where they go.

Any help/ideas very much appreciated

 

[Body Stripping]

spl near dudley 01384 242010

[Short motor reconditioning - Midlands]

bromsgrove engines

[Genuine TR6 or Triumph Engines - How do I check]

i have a totally rebuilt tr6 engine spare that i need to sell with a cc prefix

[suck or blow]

so if i mount it on a drop down  device under the car should i make it suck or blow?