Jump to content

roy6

Registered User
  • Content Count

    17
  • Joined

  • Last visited

Recent Profile Visitors

320 profile views
  1. roy6

    metering unit

    Hi can any body tell me who has taken over from Malcolm at Prestige thanks Roy.
  2. Hi David I have just re piped my TR the no on the pump is bosch 0580254053 which I have had no trouble in 5 years but you will find bosch pumps are noisey Roy.
  3. Hi Paul I had the same problem when I fitted a new rack I cured it by slackening the clamp at the bulk head pushed the rack back up couple of mm cured it
  4. roy6

    Metering Unit

    Hi all Neil phoned today the problem is the shuttle is stuck in the shut position never had that problem before, only let it stand for 3 weeks any way now getting over hauled + injectors
  5. roy6

    Metering Unit

    Hi Iani, thanks for the phone no .Well Andy I checked the drive it is fine so phoned Neil. A great chap to talk too, he said the problem is in the MU unit so I sent the mu to him. I will follow up when he returns it.
  6. roy6

    Metering Unit

    Hi Can any one give me Neil Fergusons telephone number? Went to start my car this morning after standing for three weeks, would not start at all not even fireing. No fuel at injectors fuel pressure at 100 psi. The car has always been a good starter hot or cold. Bled the injectors for half hour, still no fuel. I think the problem is in the metering unit as none of the injetors are working. Thanks for any help Roy
  7. roy6

    mu unit

    HI can any one on the forum give me Neil Ferguson phone no. My car has been running good but left stand for 3 weeks and went to start it today. Fuel pressure is fine at 100 psi. No fuel at injecters. Bled for half an hour still no fuel. Car normally starts straight away even when I have had injecters out and new fuel pipes fitted recentially. I need help. Roy
  8. roy6

    Overdrive

    Hi can any one tell me if all A type overdrive cases are the same as I hit some thing with mine and cracked it I have been offered one but need make sure it will fit my box thanks for any information Roy.
  9. Hi Chris give me a call on 07821715617 thanks Roy
  10. Hi Chris I live in Newhaven you are welcome to come and have a look at my 6 I have also got all the equipment for setting the tracking and camber if req. Roy.
  11. Hi, I used Ashford Chroming - I delivered my parts to them and had nothing but trouble. I had to keep phoning them up and after 2 months I told them I would come and collect my parts finished or not. They said they would not be at the address I delivered them too but two weeks later they did arrive. Some of the parts were missing. When I phoned them they said all parts were there. They then phoned me again and said they would do some more work for nothing!! you can imagine what I said. The chroming was fair but had some marks and the missing parts were not returned. If you use
  12. Hi there is a member on here called FELIX he made mine a few months ago and it works great and easy to fit I think he works away so keep trying to contact him it is well worth it Roy.
  13. Hi NICK YOU NEED TO TAKE THE FOUR SCREWS OUT ON TOP OF THE MOTOR AND REMOVE THE PLATE THEN TAKE THE CLIP OF THE TOP OFF THE GEAR AND REMOVE IT ON THE UNDER SIDE YOU WILL SEE A PLASTIC RAMP TAKE OUT CAREFULLY WITH A SMALL SCREW DRIVER AND THEN PUT IT BACK IN THE OTHER TO HOLES OPPOSITE THEY WILL THEN PARK ON THE DRIVERS SIDE DONE MINE TO DAY BEST OF LUCK Roy.
  14. membership no

  15. Hi Wilfried There is one on ebay item no 221658553447 Roy.
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.