John Morrison
Moderators-
Content Count
5,014 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by John Morrison
-
Hi Nick iif what you have seems ok then I’d leave as is and keep these wrapped on the shelf John
-
Drilling GB top cover to fit inhibitor switches
John Morrison replied to John Morrison's topic in General TR Technical
Magic Stuart thanks as always John -
Drilling GB top cover to fit inhibitor switches
John Morrison posted a topic in General TR Technical
Hi all, can anyone tell me the thread and pilot hole diameter required to drill and tap a blank top cover to convert to O/D inhibitor switches? Cheers John. -
Solway Aviation Museum hopes to save Blackburn Beverley XB259
John Morrison replied to John Morrison's topic in Social Scene
An update, local news is reporting the Solway Aviation, reached it's target, and that the project to dismantle, and transport the Beverley to their site near Carlisle has started. Nice to post a good news story. John. -
Looking forward to this Tim, John.
-
Wanted
John Morrison replied to John Morrison's topic in For Sale, Swap or Wanted, maximum value £250
Thanks all, Stuart, yes in hand but I'd prefer good, used if poss. N. do you have a number for Helen, you could PM me? John. -
Wanted
John Morrison replied to John Morrison's topic in For Sale, Swap or Wanted, maximum value £250
Hi Rich, yes just so, I can swop for a saloon if anyone wants. P.S. belated thanks for the casing by the way, rebuilt with overdrive, tested and in my 3A project! John. -
A type overdrive rear tail casing, please. John.
-
Sense would be considerably more than we are paying for our windscreens! John.
-
Spot on John. the plenum has an opening in the back to match the dash vent. It has a bottom lip that’s only(from memory) 25/30 mm If the drain hole is even partially blocked then the chamber is easily overwhelmed- hence the wet knee I effected a cure having blown most of the debris choking the drain hole out, with a piece of Ally liberally smeared with a good mastic between the plenum and the Black foam. Its awkward but if the Ally comes about halfway up the vents Black body you’ll still have some fresh air facility Must be 15 years since I did this and no wet kn
-
Interesting thanks Ralph John
-
Hi David - nope, not a desernable one anyway John
-
Thanks for th equick respones chaps. No probs with the celly thinners, but I don't have an ultrasonic bath, wandering now on the thoughts on, an overnight soak in thinners then a rinse and blast in the dishwasher? John.
-
Hi all, what’s the latest thinking on best stuff to clean Ally carb bits, perhaps submersed in a solution for a while? John
-
Hi Steven, the end is a bit tired, though it won't take long for anew one to look like yours does around the location holes. If I were you I'd buy a new one, my experience is that good used are all somewhat marked. John
-
Lovely perfect timing for a fabulous summer of TR’ing fun Very Well Done and many congratulations Especially love the colour- Primrose? John.
-
From Eurocarparrts at the moment, I bought half a dozen cans, looked at the other stuff, 5 X litres etc, spayer and decided at my time of life its not worth the phaff. John. TRIPLE QX Brake and Clutch Cleaner 600ml - New FormulaProduct Code: 542779000 £2.89.
-
Very Nice, from any angle! John.
-
Thank You Peter, Rightly or Wrongly, I fitted another set of Polyurethane. Cheers John.
-
Thanks guys, as usual Stewart is on the money, involved with a gearbox swop, on this 1963 TR4 non-overdrive to an overdrive box, and when we got stuck in, transpires car has been running a 3 synchro box since recent purchase! Hence the question. cheers John.
-
Why Can't Longstanding members access the forum
John Morrison replied to RogerH's topic in Social Scene
Thanks John, Mick and all. Been distracted by doing a gearbox swop on a fellow group members car, should have been a simple non -overdrive to overdrive swop, but it ain't been! John. -
Me Too, John.
-
Just a quick question folks. I know early TR4's had some carry overs from late Tr3A's, front suspension, seats etc., but did any come from the factory with three synchro gearboxes? Cheers John.
-
Hi Shaun, yes welcome to our forum, and congratulations on restoring your families Tr2. I have changed the title of your post, to hopefully better solicit replies from those who can help. Hope this is OK/ regards John.
-
Yes to all who where the green, anywhere in the world, Happy St Patricks Day, and congrats on the Rugby too! John.