Drewmotty Posted December 14, 2017 Report Share Posted December 14, 2017 Im struggling to determine the original route for the oil line from the filter housing through the flexible hose and onto the solid pipe clipped to the bulkhead. Does the solid pipe from the filter housing clip to the front or rear fuel pump stud? Where should the solid pipe run down to the bulkhead to the flexible. Along the wiper motor shelf? or along the battery shelf? Does anyone have any pictures? Thanks. Quote Link to post Share on other sites
Drewmotty Posted December 14, 2017 Author Report Share Posted December 14, 2017 Some progress......I found a picture of the fuel pump showing the pipe clipped to the rearmost stud. Quote Link to post Share on other sites
TR 2100 Posted December 14, 2017 Report Share Posted December 14, 2017 (edited) Some photos. First 3 are before restoration and good reason to believe these represent the ex-factory condition. Last photo is after restoration (now using electric fuel pump) AlanR Edited December 14, 2017 by TR 2100 Quote Link to post Share on other sites
RogerH Posted December 15, 2017 Report Share Posted December 15, 2017 Hi Andrew, I think Alan has the correct route. I chose to run my pipe backwards along the lower level to keep it out of the way a little better. The flexible pipe is apprx the same as Alan's. Roger Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.