nigethomas Posted October 24, 2017 Report Share Posted October 24, 2017 Hi everyone Could someone tell me the measurement of where the bonnet world badge should be.i dont have the existing holes thats all and wondered what correct height should be. Cheers Nige Quote Link to post Share on other sites
Rob Salisbury Posted October 25, 2017 Report Share Posted October 25, 2017 Hi Nige, the first of the 2 fixing holes for the badge is 5.99 inches from the nose of the bonnet. Cheers Rob Quote Link to post Share on other sites
nigethomas Posted October 27, 2017 Author Report Share Posted October 27, 2017 Ok thanks Rob much appreciated. Nige Quote Link to post Share on other sites
PYU940F Posted October 30, 2017 Report Share Posted October 30, 2017 I think it is nearer 6 inches :-) Quote Link to post Share on other sites
stillp Posted October 30, 2017 Report Share Posted October 30, 2017 I think it is nearer 6 inches :-) You must have thicker paint! Pete Quote Link to post Share on other sites
Rob Salisbury Posted October 31, 2017 Report Share Posted October 31, 2017 When I measured my bonnet it had just one coat of Bondarust, (now waiting for me to put on the final coat of code 19 White), I'll bet factory spec was plus or minus 6 inches!! Cheers Rob Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.