Tonyloz Posted October 17, 2017 Report Share Posted October 17, 2017 Hi Is there a special tool for fitting the dzus on the bonnet? Looks to need squashing some how Thanks Tony Quote Link to post Share on other sites
Lebro Posted October 17, 2017 Report Share Posted October 17, 2017 Yes the washer which goes under the bonnet needs to be flattened out, once over the fastener to prevent it from falling out. I managed to do mine with a "G" clamp, & a suitably sized socket. Bob. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted October 17, 2017 Report Share Posted October 17, 2017 (edited) Toolset available from LAS Aero - Gives you an idea of what to create for your own use - If you are near Pinner I do have an original Dzus toolset Peter W Edited October 17, 2017 by BlueTR3A-5EKT Quote Link to post Share on other sites
foster461 Posted October 17, 2017 Report Share Posted October 17, 2017 Here's a my story http://www.tr-register.co.uk/rebuilders-diary/2015/11/0048/1960-TR3a-Restoration-The-Bonnet Stan Quote Link to post Share on other sites
Ian Vincent Posted October 18, 2017 Report Share Posted October 18, 2017 Look in the Moss catalogue. It tells you how to do it. No special tools required just a countersunk headed set screw and some large stiff washers. Rgds Ian Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.