len1 Posted October 8, 2017 Report Share Posted October 8, 2017 (edited) i am almost ready to put my head on. All studs are on but they seem short. has anyone got a measurement of a stud. mine are 120mm When i drop the head down it seems like i only have two thirds of the nut on .The studs are the ones off the engine. Cheers Len Edited October 8, 2017 by len1 Quote Link to post Share on other sites
rog1 Posted October 8, 2017 Report Share Posted October 8, 2017 Hi Len, I have my head off at the moment and the studs measure 120mm, same as yours. Regards Quote Link to post Share on other sites
len1 Posted October 8, 2017 Author Report Share Posted October 8, 2017 Thanks for reply. do you recall if the studs were below the top surface of the nuts ? Cheers Len Quote Link to post Share on other sites
rog1 Posted October 8, 2017 Report Share Posted October 8, 2017 No, the studs protrude through the nuts. Quote Link to post Share on other sites
len1 Posted October 8, 2017 Author Report Share Posted October 8, 2017 thanks thats that problem solved then......studs in upside down ! cheers Len Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.