Rimmer Furflex Door Seals

[AndrewMAshton]

Hello All, after having read a few comments (mostly adverse) about the seals presently available, does anyone know if the Rimmer door seals fit and is it straightforward or does it require fettling, as always, thanks, Andrew

[stuart]

I use these that fit well, plain rubber covered but dont look out of place and easier to keep clean.

http://www.woolies-trim.co.uk/p-1285-door-seal.aspx

Stuart.

[Mark69]

Stuart do you use woolies for all your seal applications, I need to replace all mine,doors boot and bonnet. If you don't who do you recommend.

Thanks in advance Mark.

Edited September 10, 2017 by Mark69

[stuart]

Stuart do you use woolies for all your seal applications, I need to replace all mine,doors boot and bonnet. If you don't who do you recommend.

Thanks in advance Mark.

Yes I do with the exception of Surrey lower seal which I buy from Seals Direct.

Best boot seal for 4/4a/5/6 is this one http://www.woolies-trim.co.uk/p-1928-small-boot-seal.aspx

Stuart.

[PYU940F]

Stuart,

Thanks for the tip about the Woolies boot seal. Have never found one to fit properly, all too bulky causing lid to sit proud and put pressure on boot hinges Last 20 years driving without one but will get the Woolies one.

 

Simon

[Mark69]

Cheers Stuart.

Mark