Graham Posted July 14, 2017 Report Share Posted July 14, 2017 Hopefully going to get the Diff and driveshafts in BUO this weekend, just got the bits out on the bench and I notice with the pollybush kit for the diff I have four large washers …nothing strange there but 2 are thinner and have a small hole in them, like all the originals, but and 2 are thicker and have a larger hole in them. It might become obvious when I get under the car but can somebody tell me which set should go n the front mounts please. Quote Link to post Share on other sites
Waldi Posted July 14, 2017 Report Share Posted July 14, 2017 Mine were all the same thickness and diameters, and I think they should be like that. Waldi Quote Link to post Share on other sites
harrytr5 Posted July 15, 2017 Report Share Posted July 15, 2017 Yes I concur, they are all the same holes for 3/8th unf nylocs. Regards Harry Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.