had17462 Posted July 14, 2017 Report Share Posted July 14, 2017 Hi all I am not going to put the rheostat in the dash do I just connect all the wires together. Nick Quote Link to post Share on other sites
Lebro Posted July 14, 2017 Report Share Posted July 14, 2017 You don't say is this is for dash lights, or heater, but either way - yes connect all & insulate. Bob. Quote Link to post Share on other sites
RogerH Posted July 14, 2017 Report Share Posted July 14, 2017 Hi Nick, as Bob says - connect them all together. There should be a red wire supplying the volts on one side of the Rheostat and then a bunch of red white wires sending the volts t the gauges. Roger Quote Link to post Share on other sites
had17462 Posted July 14, 2017 Author Report Share Posted July 14, 2017 Thanks guys it's the dash light one. Nick Quote Link to post Share on other sites
Guest ntc Posted July 14, 2017 Report Share Posted July 14, 2017 If it is a 6 just join the two red/white together. Quote Link to post Share on other sites
had17462 Posted July 14, 2017 Author Report Share Posted July 14, 2017 Thanks Neil Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.