Mark69 Posted June 25, 2017 Report Share Posted June 25, 2017 (edited) Can someone enlighten me as to what the three central slots in ed's picture are for . Thanks Mark. Edited April 14, 2020 by Mark69 Quote Link to post Share on other sites
RogerH Posted June 25, 2017 Report Share Posted June 25, 2017 Hi Mark, not normally there. Roger Quote Link to post Share on other sites
Mark69 Posted June 25, 2017 Author Report Share Posted June 25, 2017 I don't have the original bracket, fabricated one out of angle iron. Wondered what bolted to ed's Quote Link to post Share on other sites
ed_h Posted June 25, 2017 Report Share Posted June 25, 2017 Mark-- The two rightmost slots are for the "heater control ID plinth" fasteners to pass through to get to their captive nuts in the metal dash. The left slot is for the wires to the lamp socket in the plinth. You can see the slots in my original support, though the left two slots are merged. Ed Quote Link to post Share on other sites
Mark69 Posted June 25, 2017 Author Report Share Posted June 25, 2017 Thanks Ed, Difference between home market and overseas then. Mark Quote Link to post Share on other sites
ed_h Posted June 25, 2017 Report Share Posted June 25, 2017 Or maybe model year. I don't think 250s had the ID plinth, and maybe early TR6 didn't either. Ed Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.