Jump to content

Recommended Posts

Hi Dog,

 

If you want an angle drive that works the SI OEM part number is BG2401-05 for a TR6. A UK company makes the full range of SI angle drives and they are called Seedograph Richfield tel: 0115 926 4235. You might not like the price of £95 each The bodies are CNC machined and not zinc alloy die cast and therefore do not look the same. There is no messing about with copper washers as with Moss and other suppliers etc.I know a person who is on his fourth repro zinc alloy one's in just over 12months??? from these usual suppliers. If this one pack up, he is going to S R for one of there's!

 

Bruce

Link to post
Share on other sites

Thanks for all your replys just got a quote for the angle drive from speedograh has any one used them before thanks Billy the cost was £125 all in

Link to post
Share on other sites

Hi Dog,

 

If you want an angle drive that works the SI OEM part number is BG2401-05 for a TR6. A UK company makes the full range of SI angle drives and they are called Seedograph Richfield tel: 0115 926 4235. You might not like the price of £95 each The bodies are CNC machined and not zinc alloy die cast and therefore do not look the same. There is no messing about with copper washers as with Moss and other suppliers etc.I know a person who is on his fourth repro zinc alloy one's in just over 12months??? from these usual suppliers. If this one pack up, he is going to S R for one of there's!

 

Bruce

Here Is an update on the 4th repro angle drive!!!! It failed after only 200+ miles. It is now fair to say don't bother with the zinc alloy repro ones from the usual suppliers!

 

Bruce.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.