Tim D. Posted February 27, 2017 Report Share Posted February 27, 2017 Hi, I am about to fit a recon head to my TR6 that has the narrow spaced (17mm I think rather than 23mm) inlet ports. Do any of you know where to get the exhaust/inlet gasket from and how do I tell whether it is for the correct spacing? Cheers Tim Quote Link to post Share on other sites
graeme Posted February 28, 2017 Report Share Posted February 28, 2017 Hi Tim, I am sure most suppliers will have the correct gasket but Moss list it as 695-050 Cheers Graeme Quote Link to post Share on other sites
Tim D. Posted February 28, 2017 Author Report Share Posted February 28, 2017 Thanks Graeme. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted February 28, 2017 Report Share Posted February 28, 2017 (edited) Is it your own head reconditioned? Is your car twin ZS Carb with a single exit down pipe exhaust? If so.... Moss UK will know it as 213641 at under GB £ 8.00. each http://www.moss-europe.co.uk/catalogsearch/result/?search_group=&q=213641 Cheers Peter W Edited February 28, 2017 by BlueTR3A-5EKT Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.