Jump to content


Choke Cable Route and P Clip

  • Please log in to reply
21 replies to this topic

#21 brian-nz

  • Members
  • 83 posts
  • Location:New Zealand

Posted 20 February 2017 - 07:13 PM


I have HS6 carbs. My choke cable is attached to the front carb. Does it make any difference - front or back. Reason I ask is that I have rough running on cold start up - won't run properly until it is hot. Carbs have been tuned albeit when engine hot. Have tried full choke , half choke and is very frustrating especially when having to rev hard at lights and then bunny hopping through them.



  • 0

#22 Lebro

  • TR Register Members
  • 4,283 posts
  • Location:Leatherhead, Surrey UK
  • Cars Owned::1956 TR3, 1935 Hillman Aerominx, 1998 Jeep Cherokee, 1967 Triumph T120 Bonneville

Posted 20 February 2017 - 09:58 PM

Won't make any difference, which carb the cable goes to, as long as both the jets start to move downwards together.



  • 0
Left side.JPG Cobham01.JPG LHS 2016.jpg used to own   Dove_1.jpg Brooklands 1-1-2016 2.jpg GTE & Herald.jpg


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users