Jump to content

- - - - -

CV jointed shafts , a question

  • Please log in to reply
41 replies to this topic

#41 gillettejones

  • Members
  • 2 posts
  • Location:TRGB Ltd
  • Cars Owned::TR4A

Posted 20 March 2017 - 02:53 PM



We have measured these accurately, and the difference is actually 15thou. What everyone seems to forget is that 99% of the original rear hubs have been refaced (sometimes more than once) and so unless you measure against an original hub you ARE going to see quite a difference. We have fitted quite a few of these without any issues.



  • 0

#42 Motorsport Mickey

Motorsport Mickey
  • TR Register Members
  • 3,452 posts
  • Location:Nottinghamshire
  • Cars Owned::Enjoying my cars, TR 4 and Triumph Stag, Caravanning...oh yes,
    Building race engines and developing interesting developments of them, and all engineering achievments,
    Cars owned TR3a, now gone
    TR4 Racer, now sold
    TR7V8 Racer, now sold
    TR4 just entering full rebuild

Posted 20 March 2017 - 05:00 PM

Good point, I've not heard of an original unskimmed hub on it's outside wheel carrying flange being available to compare. However the new hub itself on the inside is still 32 thou thicker when measured and that would not have been skimmed.


Mick Richards

  • 0

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users