david ferry Posted June 12, 2017 Report Share Posted June 12, 2017 Rich, If you can wait, I'll measure the holes in some of the large stash I have and post the answer on here. David Quote Link to post Share on other sites
rcreweread Posted June 12, 2017 Author Report Share Posted June 12, 2017 David - thanks - that would be great Cheers Rich Quote Link to post Share on other sites
david ferry Posted June 17, 2017 Report Share Posted June 17, 2017 Rich, Apologies. All of the trailing arms I have have bushes fitted. Consequently, I can't take the measurement without removing bushes, which I do not want to do. David Quote Link to post Share on other sites
rcreweread Posted June 17, 2017 Author Report Share Posted June 17, 2017 David - its not the bush size I'm after but the size of the hole in the rear cup bit of the T/A where the shock absorber drop link fits - these holes often wear out of round, as mine have and need to be welded up and redrilled - but to what size?! cheers Rich Quote Link to post Share on other sites
AlanG Posted June 17, 2017 Report Share Posted June 17, 2017 Just checked spare I have but hole is badly worn. Parts book illustration shows hole to be the same size as the drop link thread that goes through it which is 3/8" UNF. Alan. Quote Link to post Share on other sites
david ferry Posted June 18, 2017 Report Share Posted June 18, 2017 Rich, I've measured a couple this morning. There's different measurements but, I reckon you'll be about right at 21.5mm David Quote Link to post Share on other sites
rcreweread Posted June 18, 2017 Author Report Share Posted June 18, 2017 David/Alan - thanks - that will do nicely Cheers Rich Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.