Mark1965TR4aBRG Posted August 6, 2016 Report Share Posted August 6, 2016 The rad is new - larger capacity too. Quote Link to post Share on other sites
ChrisR-4A Posted August 6, 2016 Report Share Posted August 6, 2016 May sound obvious but are you sure the standard cap you had was the correct one. Those sold at motorist shops don't usually have the correct depth or bypass for the expansion tank. You need to check the depth of the cap I think it should be 20mm and have a separate light Spring operated section at the head but others will confirm this. Quote Link to post Share on other sites
Mark1965TR4aBRG Posted August 15, 2016 Report Share Posted August 15, 2016 Oh how wrong I was....... Liner #2 turns out to be .005" shorter than the other three and only showed itself at the higher engine temps... So it's a re-build and a 7psi cap! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.