stressed Posted July 11, 2016 Report Share Posted July 11, 2016 Well I've gone and jumped in with a new project after getting the tr6 up and running It's an American Lhd1962 tr4 live axle doesn't look in bad nick I will be looking to convert it over to rhd and possibly modernise it a bit Any advice and info greatly appreciated Cheers Stressed Quote Link to post Share on other sites
Geko Posted July 11, 2016 Report Share Posted July 11, 2016 I've seen it on ebay about 3 months ago. It was a project that didn't go very far and stalled some 20 years ago...the interesting bit -for which the seller got a premium- was the short bulge. It's also 99% complete and relatively rust free if i remember well. Quote Link to post Share on other sites
Mark1965TR4aBRG Posted July 12, 2016 Report Share Posted July 12, 2016 I'd certainly start with removing the front valance spoiler effort... and finish with 45 webers.. Quote Link to post Share on other sites
stillp Posted July 12, 2016 Report Share Posted July 12, 2016 and finish with 45 webers.. No, two should be enough. Pete Quote Link to post Share on other sites
stressed Posted July 12, 2016 Author Report Share Posted July 12, 2016 Spot on with the description although I've started finding a few botchs now that I am starting to get into it to be expected I suppose on a 62 car The front spoiler has nearly fell off previous owner hacked the front valance to bits to put that monstrously in place Certainly needs a new battery tray and repairs to the bulkhead and possibly new floor panels I've certainly been thinking about twin 45s plus fast road cam etc Ooooh it's getting exciting Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.