Peter Cobbold Posted February 13, 2016 Report Share Posted February 13, 2016 - for standard 4-pot. Preferably NOS - possible sources? or have they all gone. Present head has worn bores for the rear two tappets, is there a way to recover these? eg sleeving / or boring for oversize tappets? Peter Quote Link to post Share on other sites
john 215 Posted February 14, 2016 Report Share Posted February 14, 2016 Hi Peter, Rimmers list both 10 and 20 thou oversize cam followers, Robsport can supply 10 thou over, exactly for this problem - http://www.rimmerbros.co.uk/Item--i-146594__010 http://www.rimmerbros.co.uk/Item--i-146594__020 https://www.robsport.co.uk/index.php/ct-menu-item-9/ct-menu-item-11/product/7193-cam-bucket-010-oversize Cheers John Quote Link to post Share on other sites
Peter Cobbold Posted February 14, 2016 Author Report Share Posted February 14, 2016 (edited) Hi Peter, Rimmers list both 10 and 20 thou oversize cam followers, Robsport can supply 10 thou over, exactly for this problem - http://www.rimmerbros.co.uk/Item--i-146594__010 http://www.rimmerbros.co.uk/Item--i-146594__020 https://www.robsport.co.uk/index.php/ct-menu-item-9/ct-menu-item-11/product/7193-cam-bucket-010-oversize Cheers John Many thanks John. Car is with local garage, I'll get them to measure the worn bores. Hopefully its recoverable. If not..... it will have to be one of their recon heads. Peter Edited February 14, 2016 by Peter Cobbold Quote Link to post Share on other sites
Peter Cobbold Posted February 15, 2016 Author Report Share Posted February 15, 2016 Sorted, thank you. Peter Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.