BillS Posted February 8, 2016 Report Share Posted February 8, 2016 Hi, I have lost the nut that secures the power cable to the startermotor from the solenoid - anyone know the correct thread size please. Thanks Quote Link to post Share on other sites
John L Posted February 9, 2016 Report Share Posted February 9, 2016 I had a look at mine on a Lucas motor fitted to a 6 cylinder, but I think all the solenoids would be the same, its a half nut 5/16 UNC John Quote Link to post Share on other sites
RobH Posted February 10, 2016 Report Share Posted February 10, 2016 Bill - I'm not sure which nut you are referring to - John I think has answered for the solenoid end- but the one on the starter motor itself seems to be 1/4BSF thread, though the hexagon on the nut is larger than standard. Quote Link to post Share on other sites
stillp Posted February 10, 2016 Report Share Posted February 10, 2016 Just to add to the confusion - mine is 1/4 UNC! Pete Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.