AlanG Posted November 26, 2015 Report Share Posted November 26, 2015 Just got the diff. sat on the bench. It needs new axle and pinion oil seals but is otherwise fine. I'm going to remove the rear casing while I'm at it so I can drain the old oil. Is there anything else I should be doing while it's out? Alan. Quote Link to post Share on other sites
barkerwilliams Posted November 26, 2015 Report Share Posted November 26, 2015 Alan, Have a really good look at the propshaft. If it needs to come out it is only four extra bolts and you can check & lubricate easily. Alan Quote Link to post Share on other sites
Motorsport Mickey Posted November 26, 2015 Report Share Posted November 26, 2015 Fit a drain plug hole if it's not been done before ? Mick Richards Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.