Jump to content

Overdrive wiring


Recommended Posts

My od is working ok, just done 1600 miles, but this week i had to remove the ammeter whilst fitting new bulbs and when checking that everything was working when refitted i noticed that the O/D soleonoid is operating when the battery isolator is on but the ignition switch is off? This is only happening with the O/D switch on and the gear lever in 2,3,4 gear so have i misplaced a wire somewhere, only removed the ammeter so could a wire on the wrong side cause this.

Any help appreciated.

Chris

Panic over, I had connected the white wire from the O/D relay to the ammeter instead of to the ignition switch so it was live all the time. Now only operates when ign is on.

Chris

Edited by potts4a
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.