Alfie14 Posted August 31, 2015 Report Share Posted August 31, 2015 Advice please. I note from previous postings that you need to drill out the captive nuts to accommodate the fixing studs on a Honeybourne backlight, does this stop the original hood frame and soft top being replaced in the future. Alfie14 Quote Link to post Share on other sites
stuart Posted August 31, 2015 Report Share Posted August 31, 2015 Advice please. I note from previous postings that you need to drill out the captive nuts to accommodate the fixing studs on a Honeybourne backlight, does this stop the original hood frame and soft top being replaced in the future. Alfie14 No you just need to use nuts and bolts to secure the rear hood fixing bar if and when you wish to go back to a hood. and they are a bit difficult to fit on your own thats all. Dont forget you will also need to remove/re-install the 3 side poppers and the ally forward deck extension capping piece. All that pre-supposes the car in question is a 4a/5/6 as TR4 hood fixings are different and require the 3 piece ally capping removing/replacing instead. Stuart. Quote Link to post Share on other sites
Alfie14 Posted September 2, 2015 Author Report Share Posted September 2, 2015 Hi Stuart Thanks for the info. Alfie14 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.