david c Posted August 26, 2015 Report Share Posted August 26, 2015 Once again I must appear the complete numpty. Refitting all new brake lines and hoses I have come up to the front disks, the flexible pipes I took off 18 months ago have "stand off" brackets loosely attached, I had hoped that this would be enough to tell me what goes where when fitting the new system. But no, can't for the life of me see where these brackets fix to, and I can't find the brackets pictured in the workshop manual, or in the parts catalog. These are not the welded on brackets on the suspension towers. So the question is where do they fix to, if indeed they should be there in the first place. (next time more pics..............lots more pics.) Am I glad the forum is up and running again! Thanks all for reading my ramblings, David. Quote Link to post Share on other sites
Mark69 Posted August 27, 2015 Report Share Posted August 27, 2015 Hi David On my 6 the bracket attaches to the top retaining bolt on the brake caliper, not sure if its the same on a 4. Mark Tried to load pic but failed. Quote Link to post Share on other sites
RogerH Posted August 27, 2015 Report Share Posted August 27, 2015 (edited) Hi David, as Mark states - top attachment for the caliper. Roger Edited August 27, 2015 by RogerH Quote Link to post Share on other sites
david c Posted August 27, 2015 Author Report Share Posted August 27, 2015 Thanks chaps I know it seems like a daft question, but better than guessing I guess. David Quote Link to post Share on other sites
RogerH Posted August 27, 2015 Report Share Posted August 27, 2015 Hi David, keep them coming - dafter the better (I guess) Roger Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.