Jump to content

TR4 restoration nearly finished i need a window


Recommended Posts

Hi Maggie,

Moss and the other suspects do all the bits you need (if you require new). The regulator is very good but uses Metric screws (not a problem)

 

http://www.moss-europe.co.uk/shop-by-model/triumph/tr2-4a/body-chassis/doors-fittings/doors-fittings-tr4-4a.html

 

Halfords do a nice battery HB 072 3 year guarantee or HCB072 with 5 year guarantee

For you tyre go to your local garage and get a cheap one. Have you googled KUMHO

 

Roger

Link to post
Share on other sites

I might have dreamed it but isn't the repro 4/4A glass thinner than the original?

Depends on where you buy them from. I have just replaced mine from Moss and they are the same as original.

Stuart.

Link to post
Share on other sites

Depends on where you buy them from. I have just replaced mine from Moss and they are the same as original.

Stuart.

Does that go for replacement 6 windows need to replace mine at some point. Both screen and side windows, because P O didn't care to much about protecting them from the sander

Mark

Link to post
Share on other sites

Does that go for replacement 6 windows need to replace mine at some point. Both screen and side windows, because P O didn't care to much about protecting them from the sander

Mark

Last ones I replaced were the same as per original.

Stuart.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.