Rktr4a Posted July 14, 2015 Report Share Posted July 14, 2015 Hi all, Have just removed old door skin and am proceeding to clean up frame,prime ,paint etc. Small problem I have is there are still remnants of the old skin at both end of the frame at the top which create the width for the glass channel.The question is do I grind these off and if I do I'm not sure how to replicate as the new skin doesn't have these on . Advise please . Cheers Rob Quote Link to post Share on other sites
stuart Posted July 15, 2015 Report Share Posted July 15, 2015 If the new skin doesnt have that reference then leave what is there and edge to edge fit the new skin up to the old then seam them in. Also FWIW tack the skin on and trial fit the door. Stuart. Quote Link to post Share on other sites
Rktr4a Posted July 16, 2015 Author Report Share Posted July 16, 2015 Thanks Stuart, All the best ,Rob Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.