Jump to content

Anti roll bar to lower wish bone


Recommended Posts

I found that the link between my anti roll bar and lower wish bone is non standard ( or been bodged). The original links are readily available but the wish bone bracket is or not, some suppliers suggest that the TR6 bracket can be used but may need modifying. Has anyone had a similar problem or any more knowledgeable members have any thoughts.

 

Alfie14

Link to post
Share on other sites

The bar was offered as an optional extra for 4/4a but the link ends are the same all the way through IIRC, its only the bar shape thats different.

Stuart.

Link to post
Share on other sites

Made my own mountings for the TR6 ARB on the TR3

Used MG bar to chasis brackets with MGC Poly bushes.

http://www.angclassiccarparts.co.uk/images/ww/product/MGB_ARB_Mount_kit.jpg

A shed load cheaper than TR ones!

 

This is the style of eye bolt I use to attach rose joints to my wishbones for the front ARB. Rather than the expensive bit of TR6 bent metal.

http://d2pbmlo3fglvvr.cloudfront.net/product/full/2YJP1_AS01.JPG

Regular 3/8 unf bolt thread with 3/8 hole replacing one of the wishbone to spring pan bolts.

 

This is the type of rose joint I use with a stud out the top and solid nylon mount buses to the bar end

http://www.mcgillmotorsport.com/i.php?w=750&h=750&i=images/l/937.jpg

 

Peter W

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.