Jump to content

TR6 Additional front lights


Recommended Posts

Hi Guys

 

I am looking to fit spot and fog lights to the front of my 6. I know that TR6's do not really lend themselves to supplementary lighting, but does anyone have any pictures of a 6 with additional lights fitted they can post here ?

 

I have a lucas round set and a rectangular set as well so can choose between.

 

thanks

Link to post
Share on other sites

Hi

 

These are Lucas spot and fog. Wiring diagram for fog and spot here http://www.advanceautowire.com/

 

Hope this helps

 

Bill

 

017.jpg

 

 

 

018.jpg

Same colour as mine, so I can see exactly how it would look. thank you

 

Are there any issues with the bonnet tipping forward, ie clearance ?

Link to post
Share on other sites

Mike the King of Bling also has a nice Twin Headlight setup on his Red 6,all Reversible if you want to change back to Original.

I've been debating this in my mind also and Mike's is the best I've seen but I don't want to cut into the grille

 

Just picked up a cheap set of Cibie rectangular spots so going to try them either under the bumper or maybe behind the grille

 

Graze

Link to post
Share on other sites

Niall, am I missing something ? I can only see the standard pair of driving lights.

Link to post
Share on other sites

Here they are again, for anyone interested :P

 

I did try lights behind the grille not pleased hence my conversion.

 

Cheers

 

Mike

Link to post
Share on other sites

Niall, am I missing something ? I can only see the standard pair of driving lights.

Hi KOB you need to look at post No 5 at the picture.

 

Cheers

 

Mike

Edited by mike3739
Link to post
Share on other sites

Fellas I like you lights! Are they actually fitted into the grill? Andy

Link to post
Share on other sites

Fellas I like you lights! Are they actually fitted into the grill? Andy

Hi Andy

 

Mine are, with both main & dipped beam 5 3/4 inch headlamps set in plasic bowls, you only need to cut the grille & a couple of holes in front panel to mount the bowls.

 

Both the original headlamps & the inner ones are HID conversions & never failed an MOT.

 

Cheers.

 

Mike B)

Link to post
Share on other sites

Arh, all is now clear.thanks chaps

Link to post
Share on other sites

Andy,I've gone a different way,2 Spot Lights Drilled 10mm through the Centre of the back of the Bowls,70mm Bolt with a 3" Square 2.5mm Plate 10mm hole in centre,put flat up against Grille and put another Plate on inside of Grille and Bolt together using the Grille as the Clamp.No Cutting of the Grille whatsoever all I removed was the Centre Bar which was held on with small fixings,I have mine Wired with Relays and come on as Full Headlights.

Link to post
Share on other sites

Niall, Mike

 

Thanks lads plenty to consider from those 2 options

 

Graze

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.