Jump to content

Moss electric fan sensor


Recommended Posts

Hi Alfie,

haven't got a diagram but the wiring is simple.

 

Live feed into the pipe sensor, Wire from sensor to coil in a relay. other side of coil goes to earth.

(when the sensor activates the relay will close its contacts)

 

Live (Fused) feed to one side of the relay contacts. The other side of the relay contact goes to the fan. The other side of the fan goes to earth.

When sensor activates the relay closes and sends Live feed to the fan)

 

For the override simply bring a wire off each of the sensor tags and connect to a change over switch.

(If the sensor is not activated flip the switch and the fan will run) Fit a warning light to the switch.

 

Roger

Edited by RogerH
Link to post
Share on other sites

Here's a diagram which covers most things.

Make sure that the fan spins in the correct direction so that air passes through the radiator from front to rear!

Ian Cornish

post-4157-0-55487200-1429773832_thumb.jpg

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.