TR4A1965 Posted April 5, 2015 Report Share Posted April 5, 2015 (edited) Hi, Has anyone got any photographs of where the oil line and oil pressure switch are located on a TR4A. I am using the original purlator. Picture of the type of switch attached. Many thanks for your help. Paul. PS: I have a new neighbour who has a TR3A, TR4a IRS, TR5 & TR6 - all need work but good to have a like minded soul not far away:-) He's not a member of the TR register - yet!!:-) I'll work on him:-) Edited April 5, 2015 by TR4A1965 Quote Link to post Share on other sites
TR 2100 Posted April 5, 2015 Report Share Posted April 5, 2015 4 TRs and not a member! They are still out there. Would be interesting to find out if he has any particular reason for not joining. AlanR Quote Link to post Share on other sites
stuart Posted April 5, 2015 Report Share Posted April 5, 2015 The oil feed for the gauge is taken off the long stud at the front left side of the filter housing.Make sure you fit the copper washers the right way round, larger one on the inside of the banjo and the small one on the outside. There is no oil light switch. Stuart. Quote Link to post Share on other sites
mike3md Posted April 5, 2015 Report Share Posted April 5, 2015 Paul, You can add an oil light switch with this: http://www.triumphspecialtuning.com/index.php?route=product/product&path=36&product_id=92 Mike Quote Link to post Share on other sites
TR4A1965 Posted April 5, 2015 Author Report Share Posted April 5, 2015 Thanks Stuart and Mike:-) Best Paul. Quote Link to post Share on other sites
monty Posted April 8, 2015 Report Share Posted April 8, 2015 Paul, You can add an oil light switch with this: http://www.triumphspecialtuning.com/index.php?route=product/product&path=36&product_id=92 Mike Yes, I bought mine from TR enterprises, excellent! Monty. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.