TR4A1965 Posted January 25, 2015 Report Share Posted January 25, 2015 Hi. I have 2 inlet manifolds to choose from for my TR4A but I guess only 1 is correct. 1 appears to have a breather pipe and the other does not. The one without the breather pipe has a casting that protrudes in a triangular shape. I'll be using HS6 carbs. So which inlet manifold is correct? Many thanks Paul Quote Link to post Share on other sites
Geko Posted January 25, 2015 Report Share Posted January 25, 2015 Hi. I have 2 inlet manifolds to choose from for my TR4A but I guess only 1 is correct. 1 appears to have a breather pipe and the other does not. The one without the breather pipe has a casting that protrudes in a triangular shape. I'll be using HS6 carbs. So which inlet manifold is correct? Many thanks Paul the one with the casing is 4 the one with the breather pipe is 4A Quote Link to post Share on other sites
TR4A1965 Posted January 25, 2015 Author Report Share Posted January 25, 2015 Thanks Stef. Best. Paul. Quote Link to post Share on other sites
peejay4A Posted January 25, 2015 Report Share Posted January 25, 2015 Page 48 of the Moss catalogue shows pictures of all the 4 pot manifolds for the avoidance of doubt. Quote Link to post Share on other sites
Mark1965TR4aBRG Posted January 26, 2015 Report Share Posted January 26, 2015 Apologies for hijacking this thread, but I have had my breather pipe blocked off pretty much for ever - does anyone know if there is a bespoke plug available? It's a taper thread and if I get my Zeuss book out I'll work it out, but perhaps there's something available so I don't have to bother with all that? Thx Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.