Jump to content

Recommended Posts

Hello All

I know some of you use these sorts of things and not knowing much about them is something like this any good?

 

Or is the usual if it looks to cheap it is probably is rubbish?

 

http://www.ebay.co.uk/itm/221443803963?_trksid=p2060778.m1438.l2649&var=520315572694&ssPageName=STRK%3AMEBIDX%3AIT

 

Not that I have a use for one but you know boys and toys(may save going to the doctors!!!!!!!!!!!!!!!!!)

 

Roger

Link to post
Share on other sites

It probably will work OK but the drawback of this will be the flexibility of the cable. How do you steer it to where you want to view, if the target is not just a narrow pipe ? There are other similar devices with formable semi-rigid cables which will allow you to steer the lens head more easily, though they are much shorter. However, at that price I guess it really does not matter. - you could afford to have both types !

Link to post
Share on other sites

Hi Roger

 

At that sort of money it's worth getting one, you could always make up a wire coil around the cable to stiffen it a bit. My 6mm endoscope/boroscope kit cost me a couple of grand in the late 80s when I was opening safes (legitimately).

Link to post
Share on other sites

Roger - the high price for a professional boroscope is due to the coherent optical- fibre bundle used in the cable. These cheap things generally just have a miniature CCD camera chip at the business end so no fibre bundle is involved. They are good enough for DIY work but probably not for keyhole surgery!

Link to post
Share on other sites

I was simply emphasizing the difference in price V quality.

 

You can't expect too much at a tenner. But could come in handy even with a poor quality image.

 

Not all boroscopes use fibre-optics - the high end still use rigid tubes and quality glass lenses = expensive

 

Roger

Link to post
Share on other sites

I still have my 6mm rigid keymed (KMI) borescopes with olympus optics, fiber flexible light lead and light source, as you say awsome to use and bleeding expensive. :o

Edited by Kevo_6
Link to post
Share on other sites

I have two of them in use.

Expected to watch the cylinder bore through the spark plug bore.

That was nonsense, probably you can see bigger defects

but the distance must be okay to get picture sharp and with light.

 

Looked into the fuel tank for rust and loose particles.

With some help I just found the sender of the fuel level...........

 

Later I connected the inlet manifold to my Rover V8.

The camera was good to use to see if there are edges between

manifold and head and gasket through a 90 degree turn in the manifold.

That was the only case that I was really happy to use it.

 

In case of emergency any help will be good but to be honest

the sense of these cheap Charlys is much limited!

Link to post
Share on other sites

I bought a similar device with a 5m cable so the passenger can watch the SU piston lift while I drive.

I think it could also be adapted to look at the timing mark illuminated by strobe light while driving at different engine loads and rpm. eg to measure vac advance which cant be done stationary.

Peter

Link to post
Share on other sites

I bought a similar device from Lidl a year or so ago, it is self contained with a small LCD colour screen. Comes with a semi-rigid "cable" around a metre long. I have used it for many things, & would recommend. The one thing it does not do is record the video, I believe some of this type can do that.

Cost around £75 I think.

Link to post
Share on other sites

I bought a similar device from Lidl a year or so ago, it is self contained with a small LCD colour screen. Comes with a semi-rigid "cable" around a metre long. I have used it for many things, & would recommend. The one thing it does not do is record the video, I believe some of this type can do that.

Cost around £75 I think.

 

I have the same works well

 

Cheers

 

Alan

Link to post
Share on other sites

I just got one, I think its a great tool...it won't last forever, but in 5 years they'll be sharper/brighter/smaller/cheaper.

 

Its just a webcam in a 10mm tube housing. Now I can skype live close-ups of my internals to all of you... all i need is a 10mm access hole.

 

A straightened coathanger gives the cable some rigidity to steer the cam into mysterious places...as it's supplied the cable is too floppy to probe deeply....

Link to post
Share on other sites

At that price it is hard to go wrong.

I bought a dental intra-oral camera (built in LED lights) that popped up in one of the dental magazines at about 10x that price but well below the usual price.

came in handy when doing the TR4A rebuild at times. able to have a good sqizz at the inside of the chassis and a few other spots otherwise inaccessible.

you'll be able to dream up other uses for it too.

 

(can see Roger wants to recommend Viagra.)

Edited by littlejim
Link to post
Share on other sites

Presumably it plugs into your PC or laptop and functions like a web cam.

 

For a tenner you are not going to get the quality you might need to work on your knee joint but for looking for wires in ceiling voids it's probably OK.

 

Given the advances in optical sensors there's probably little case for the expense of fibre optics for automotive use these days.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.