mleadbeater Posted August 22, 2014 Report Share Posted August 22, 2014 hi Can someone please tell me the length of the rear overrider spacing tube, ie the one sloping down from the overrider through the rear body, also, as a check the clearance between the body and the mounting bracket. Thanks Mike Quote Link to post Share on other sites
Paul Down Posted August 23, 2014 Report Share Posted August 23, 2014 Mike, not so easy to measure as the tube passes through the body and the body is not flat i.e has complex curves in this area. The distance from the body to the bracket where the bolt secures it is 6cm on both sides of my 59 3A. However one bracket (OS) is flat at this point whereas the NS is curved, car could have had a bang at some time. Hope this makes sense Paul Quote Link to post Share on other sites
Bob Smith Posted August 23, 2014 Report Share Posted August 23, 2014 Mike, Distance Piece Rear Overider Part Number 602001 Length 106.5mm / 4.193" O/D 15.9mm / 0.625" I/D 10.28mm / ).404" Measurements taken with Vernier calipers on spare item. Quote Link to post Share on other sites
mleadbeater Posted August 23, 2014 Author Report Share Posted August 23, 2014 Paul, Bob, thanks for the info, got them fitted fine, just wheels and tyres to sort then ready for a launch. Cheers Mike Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.