AndyC 4A Posted July 20, 2014 Report Share Posted July 20, 2014 On fitting the front bumper/fender, I have noticed it seems to twisted such that the return around the wings are pointing more towards the ground than the horizontal. Looking at a number of "google" images, I see that others have the same issue. I assume that fully horizontal is correct. So my question is could this be bent mounting arms, a bent chassis leg issue or something else? (I have not seen any other signs of a front end shunt). Andy Quote Link to post Share on other sites
Geko Posted July 20, 2014 Report Share Posted July 20, 2014 or fitted with TR4 mounting brackets Quote Link to post Share on other sites
stuart Posted July 20, 2014 Report Share Posted July 20, 2014 Have you got the half moon packing pieces fitted to the bolts? Stuart. Quote Link to post Share on other sites
AndyC 4A Posted July 21, 2014 Author Report Share Posted July 21, 2014 Ah, if I am honest, no. There were a couple on the original bumper but not on all bolts. Should I invest in a set? Quote Link to post Share on other sites
AlanT Posted July 21, 2014 Report Share Posted July 21, 2014 Yes, if you want it at the correct angle. Even with the correct parts these bumpers are a bit tricky to get exactly right. Quote Link to post Share on other sites
Mark1965TR4aBRG Posted July 22, 2014 Report Share Posted July 22, 2014 Alan is right - they'll take some fettling to get right but it can be done. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.