Jump to content

Master Cylinder Reservoir


Recommended Posts

Hi Tom,

Just to expand on what Neil said. The height of the reservoir in the clamp is fairly critical so you do not catch it when the bonnet closes. If you can see the transfers below the clamp you are probably OK!.

Also a good idea to snug the connectors to the reservoir up before fitting the pipes, perhaps if not new fit new washers. Always support the canister connectors when you nip up the pipe connectors, saves leakage onto fresh paintwork. They can be a pig to get a decent seal.

 

 

P1010080.jpg

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.