Brian Wiggins Posted March 30, 2014 Report Share Posted March 30, 2014 I have a CR '6' with an interior light switch located on the 'H' frame. Unfortunately it sit's in blissful isolation disconnected from the wiring loom with no obvious loose wires in it's vicinity. It looks like a PO has discarded this part of the loom. Whilst I can see how it's connected on a schematic wiring diagram I've no idea where the connectors are located therefore can someone be kind enough to provide me with some guidance on how it's connected to the interior light circuit. Thanks in advance! Brian Wiggins Quote Link to post Share on other sites
KOB Posted March 30, 2014 Report Share Posted March 30, 2014 I have been tracing these very wires this afternoon, there is a pair that eminates from the main loom as it disapears behind the heater box, just to the left of the box, colour as the wd.I am repositioning my interior light switch so had to find them. Hope this helps. Quote Link to post Share on other sites
Brian Wiggins Posted March 31, 2014 Author Report Share Posted March 31, 2014 Hi! Many thanks for taking the trouble to reply and I'll check this out later this evening and let you know!! Regards Brian Wiggins Quote Link to post Share on other sites
Steves_TR6 Posted March 31, 2014 Report Share Posted March 31, 2014 and all the switch does is earth the appropriate side of the bulbs, as do the door switches. So very easy to wire up if you don't have the original wiring :-) steve Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.